Connected Pneumatic Blowline Magnet
Connected Pneumatic Blowline Magnet
New Pneumatic Blowline Magnet
Connected Pneumatic Blowline Magnet

Genuine MAGNATTACK™ Pressure pipeline Magnets have this new distinctive labeling.

Pneumatic Blowline Magnets

MAGNATTACK™ Global has developed a high intensity range of magnets to suit Pneumatic Blowline and Vacuum transfer lines. The MAGNATTACK™ range of Spherical Blowline Inline magnets have been carefully configured and designed using only the highest grades of material for use in sensitive food applications. MAGNATTACK™ Global's Sperical Pnumatic transfer magnet is now being used in very sensitive dairy applications in the USA, Australia and New Zealand with critical dairy surface finishes and standards adhered to.

The MAGNATTACK™ SP Blowline and Vacuum line magnets consist of an incredibly high strength magnetic element with flux strengths ranging from 10,000 gauss to over 12,000 gauss in some of the larger models. The MAGNATTACK™ inline Spherical Pneumatic Blowline / vacuum line magnet offers  efficient extraction of tramp iron – large, small, fine & rust as well as work hardened stainless steel fragments & magnetic stone particles using RE80™ 10,000 gauss technology. in addition the magnetic element is configured to offer excellent retainability of metal fragments, so that they are not pushed back into the product stream by the force of product traveling at a high velocity through the pipeline or transfer line.

This Spherical Pneumatic Blowline or Vacuum line magnet is aerodynamically designed to also allow for use in gravity out feed situations and on food products containing particulates up to 15mm with low resistance to flow without affecting bulk density.

Features:

  • Aerodynamically designed
  • Quick magnet removal and reseal
  • Cleaning station and brush provided
  • Safety cable and lock provision
  • Efficient out of the way retention area on the outgoing hemisphere
  • Similar clearance around sphere cross section of feed pipe = low resistance to flow

The MAGNATTACK™ Spherical Pneumatic Blowline / Vacuum line magnet is also well engineered to allow for easy and quick removal and re-seal of the magnetic element to allow for magnet cleaning efficiency.

The magnet is easily installed & can be used inline on Blowlines (lean phase) and Vacuum lines up to 150mm in diameter.

MAGNATTACK™ Global has many sucessful installations of the inline magnet system throughout the world. 

Find Out More

Request a brochure




Terms and Conditions

MAGNATTACK™ Global Copryright 2010